Construction: The new LEEC Classic Range of incubators have fully sealed chambers manufactured from polished stainless steel with rounded corners for easy cleaning. The outer cabinet is manufactured from stainless steel, and has a tough powder coat paint finish. This gives the incubator exceptional corrosion resistance. An inner glass viewing door closes positively onto a silicone gasket and allows a clear view of the chamber contents without disturbing the internal atmosphere. The outer door has a magnetic gasket providing a good seal. A rear access port allows temperature monitoring probes to be inserted safely into the incubator chamber.

     SPECIFICATIONS

MODEL

C100

C157

C330

External (Dimensions H x W x D mm)

582 x 684 x 620

 790 x 684 x 620

 1417 x 684 x 620

Internal (Dimensions H x W x D mm)

 365 x 550 x 500

 573 x 550 x 500

1200 x 550 x 500

Chamber Capacity (litres)

 100

 157

330

Shelves Included

 2

 4

 6

Power Rating (watts)

 240 (maximum)

 280 (maximum)

 440 (maximum)

Weight (kg)

 54

 70

 107

Temperature Range

 At least 5° C above ambient to +60°C

 At least 5°C above ambient to +60°C

 At least 5°C above ambient to +60°C

Temperature Control

 Typically +/-0.1°C at 37.0°C

 Typically +/0.2°C at 37.0°C

 Typically +/-0.1°C at 37.0°C

Temperature Variation

 Typically better than +/-0.2°C at 37.0°C

 Typically better than +/-2°C at 37.0°C

 Typically better than +/-0.2°C at 37.0°C

Temperature Recovery

 2 minutes (approx.)

 3 minutes (approx.)

 4 minutes (approx.)